When Was The Last Time You Updated Or Replaced Your Raised Floor System

If your company makes use of raised access floor systems, the floors probably serve to support some of the most valuable assets in your possession

If your company makes use of raised access floor systems, the floors probably serve to support some of the most valuable assets in your possession. Because of this, it is extremely important to gain an understanding of the typical lifespan of your floor as well as the signs that you and your team should look out for in order to determine whether it is time to renovate or replace the floor.

Do You Need Your Raised Access Floor to Be Replaced? Reach Out to Us Right Away

RAISED FLOOR LIFESPAN

SPC vinyl flooring is essential to first be aware that raised floors are not permanent, and the amount of time that your company can expect to get out of the floor panels will vary depending on how they are used. In light of this, raised access floors typically have a lifespan of approximately 25 years. However, once a floor reaches the 20-year mark, we advise that a company start thinking about whether or not it should be replaced. When it comes to the lifespan of a floor, pushing it past its limits can result in potentially expensive consequences.

HOW TO GET THE MOST LIFE OUT OF YOUR RAISED FLOOR AND MAKE IT LAST LONGER

The following are some of the best practices for maintaining your raised access floor:

Floor inspections performed on an annual basis by a qualified technician

Panels on the floor that rotate on a regular basis

 

Immediately replace any panels that are damaged.

 

  1. When your raised floor is getting close to the end of its useful life or when it starts showing signs that it may need to be replaced, it is time to call in the professionals for help

  2. It is possible to repair your floor without interrupting business operations if you work with an experienced team such as the General Contractors at Accessfloorstore

  3. com



SIGNS A RAISED FLOOR NEEDS REPLACING

Even though raised floor systems have a long lifespan, your team needs to actively monitor the system to make sure there aren't any potential flaws or problems. The majority of problems stem from excessive weight and foot traffic, both of which can cause floor panels to warp, rock, and lip. In addition, the pedestals that support the floor are susceptible to damage, such as deflection, just like the rest of the floor itself. Always keep in mind the weight limits of your floor panels in order to prevent problems like this one from occurring.

The installation of raised floor systems provides an incredible amount of value to a wide variety of commercial and industrial settings. Unfortunately, they are not impervious to damage and they do not last forever. If your floor is old or damaged, it poses a risk to both your equipment and your employees. Keep an eye on your flooring system, and when you're ready to make some changes, give Accessfloorstore. com a call!

The Raised Access Floor Panel design from Accessfloorstore creates the composite structure of a concrete slab by combining the tensile strength of steel with the compressive strength of concrete. This results in a stronger overall structure. It is the only panel of its kind that was developed specifically for application in a commercial setting. Conventional welded steel panels might be the best option for equipment rooms, but they're not the best option for work environments because they're noisy and make the space feel flimsy. After you've walked on it just once, you'll understand why Accessfloorstore Floors are the only genuine option available to meet your requirements.

The Raised Access Floor System is a modular product that is constructed out of tiles that measure either 600 millimeters by 600 millimeters by 33 millimeters or 600 millimeters by 600 millimeters by 35 millimeters. In order to create a variety of levels, a flat steel top sheet is spot-welded to an embossed steel bottom sheet, and these two sheets are then supported by a steel structure of varying heights. All of the SPC vinyl flooring panels are completely autonomous and identical to one another, which enables them to interchange with one another, achieve high durability and mechanical strength, and provide access to the space that is still available underneath. RAF systems are an efficient answer to the problem of managing space within an organization. In an underfloor space, it is simple to manage systems like power and data, heating and cooling, and one can also achieve minimal heat loss and an improvement in indoor air quality. We are able to get more space and flexibility in the systems that make up the infrastructure, which will allow you to respond rapidly and economically to changes in organizational structure, expansion as a result of growth, adjusting to new technologies, and integrating new communication tools.

A System for Bare-Finish Panels

The CRC Steel Top Sheet that is used in the construction of Bare Access Floors is welded in 128 different locations to the embossed bottom pan that has foaming cement infilled into it. The top surface of these panels is typically coated with a powder that has an epoxy base.

After the top steel plate and the bottom steel plate have been spot-welded together to form a high-quality shell, the shell is then cut to dimensions of 600 mm on each side. The shell is given a treatment called phosphating, then it is painted with powder coating, and then, under high pressure, a foaming cement compound that is light weight and non-combustible is injected into the inner empty core of the panel. This is done to ensure that there are no air gaps left behind. Once the curing process is complete, the structure will be stable and strong enough to support the loading capacity that was designed for it. A high level of strength and durability can be found in the bare access floor panel. Due to the low minimum – maximum gap between panels, one is able to achieve better acoustic quality and eliminate squeaking sounds. Bare Panel Systems are also helpful in locations where there are height restrictions. They can be adjusted to a minimum height of 4 inches if necessary. The top surface finish of bare panel systems can be covered with a variety of different options, such as carpeting, vitrified tiles, wood planks, and so on, in order to conform to the aesthetics of corporate themes and interiors.

Application Utilized for Computer Rooms, Data Centres, and Communication Centres, as well as Auditoriums, Exhibition Centres, and Showrooms.


vbcncvn

11 Blog posts

Comments